Startseite Technischer Indikator Beitrag

MACD Kerzenindikator für MetaTrader 4: Ein Leitfaden für Trader

Mike • 2019-02-07 00:26
2 0 0
Anhang
23545.zip (1.85 KB, Herunterladen 0 mal)

Der MACD-Kerzenindikator zeigt farbige Kerzenbalken für den MACD-Indikator über oder unter der Null (0) an. Mit diesem Indikator kannst du schnell erkennen, ob der MACD über oder unter der Nulllinie liegt, was dir hilft, bessere Handelsentscheidungen zu treffen.

Konfigurierbare Parameter:

  • MACD-Stufen
  • E-Mail-Benachrichtigung
  • Audible Warnung
  • Push-Benachrichtigung
#property copyright   "MACD Above Below Zero Color Bars"                   
#property copyright   "ckart1.simplesite.com"  
                           
#property copyright "Copyright 2015, MetaQuotes Software Corp."
#property link      "https://www.mql5.com"
#property version   "1.00"
#property strict

#include <stdlib.mqh>
#include <stderror.mqh>

//--- Indikator-Einstellungen
#property indicator_chart_window
#property indicator_buffers 8

#property indicator_type1 DRAW_HISTOGRAM
#property indicator_style1 STYLE_SOLID
#property indicator_width1 3
#property indicator_color1 0xFF2600
#property indicator_label1 "MACD Above Zero"

#property indicator_type2 DRAW_HISTOGRAM
#property indicator_style2 STYLE_SOLID
#property indicator_width2 3
#property indicator_color2 0xFF0303
#property indicator_label2 "MACD Above Zero"

#property indicator_type3 DRAW_HISTOGRAM
#property indicator_style3 STYLE_SOLID
#property indicator_width3 1
#property indicator_color3 0xFF0033
#property indicator_label3 "MACD Above Zero"

#property indicator_type4 DRAW_HISTOGRAM
#property indicator_style4 STYLE_SOLID
#property indicator_width4 1
#property indicator_color4 0xFF0059
#property indicator_label4 "MACD Above Zero"

#property indicator_type5 DRAW_HISTOGRAM
#property indicator_style5 STYLE_SOLID
#property indicator_width5 3
#property indicator_color5 0x0000FF
#property indicator_label5 "MACD Below Zero"

#property indicator_type6 DRAW_HISTOGRAM
#property indicator_style6 STYLE_SOLID
#property indicator_width6 3
#property indicator_color6 0x0000FF
#property indicator_label6 "MACD Below Zero"

#property indicator_type7 DRAW_HISTOGRAM
#property indicator_style7 STYLE_SOLID
#property indicator_width7 1
#property indicator_color7 0x0000FF
#property indicator_label7 "MACD Below Zero"

#property indicator_type8 DRAW_HISTOGRAM
#property indicator_style8 STYLE_SOLID
#property indicator_width8 1
#property indicator_color8 0x0000FF
#property indicator_label8 "MACD Below Zero"

//--- Indikator-Puffer
double Buffer1[];
double Buffer2[];
double Buffer3[];
double Buffer4[];
double Buffer5[];
double Buffer6[];
double Buffer7[];
double Buffer8[];

extern int Fast_EMA = 12;
extern int Slow_EMA2 = 26;
extern int MACD_SMA3 = 9;
datetime time_alert; // verwendet für die Warnung
extern bool Send_Email = false;
extern bool Audible_Alerts = true;
extern bool Push_Notifications = false;
double myPoint; // initialisiert in OnInit

void myAlert(string type, string message)
  {
   if(type == "print")
      Print(message);
   else if(type == "error")
     {
      Print(type+" | MACD Above Below Zero @ "+Symbol()+","+Period()+" | "+message);
     }
   else if(type == "order")
     {
     }
   else if(type == "modify")
     {
     }
   else if(type == "indicator")
     {
      Print(type+" | MACD Above Below Zero @ "+Symbol()+","+Period()+" | "+message);
      if(Audible_Alerts) Alert(type+" | MACD Above Below Zero @ "+Symbol()+","+Period()+" | "+message);
      if(Send_Email) SendMail("MACD Above Below Bars", type+" | Gann Arrow @ "+Symbol()+","+Period()+" | "+message);
      if(Push_Notifications) SendNotification(type+" | MACD Above Below Zero @ "+Symbol()+","+Period()+" | "+message);
     }
  }

//+------------------------------------------------------------------+
//| Funktion zur Initialisierung des benutzerdefinierten Indikators   |
//+------------------------------------------------------------------+
int OnInit()
  {   
   IndicatorBuffers(8);
   SetIndexBuffer(0, Buffer1);
   SetIndexEmptyValue(0, 0);
   SetIndexBuffer(1, Buffer2);
   SetIndexEmptyValue(1, 0);
   SetIndexBuffer(2, Buffer3);
   SetIndexEmptyValue(2, 0);
   SetIndexBuffer(3, Buffer4);
   SetIndexEmptyValue(3, 0);
   SetIndexBuffer(4, Buffer5);
   SetIndexEmptyValue(4, 0);
   SetIndexBuffer(5, Buffer6);
   SetIndexEmptyValue(5, 0);
   SetIndexBuffer(6, Buffer7);
   SetIndexEmptyValue(6, 0);
   SetIndexBuffer(7, Buffer8);
   SetIndexEmptyValue(7, 0);
   //myPoint initialisieren
   myPoint = Point();
   if(Digits() == 5 || Digits() == 3)
     {
      myPoint *= 10;
     }
   return(INIT_SUCCEEDED);
  }

//+------------------------------------------------------------------+
//| Hauptfunktion zur Berechnung des benutzerdefinierten Indikators |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
                const int prev_calculated,
                const datetime& time[],
                const double& open[],
                const double& high[],
                const double& low[],
                const double& close[],
                const long& tick_volume[],
                const long& volume[],
                const int& spread[])
  {
   int limit = rates_total - prev_calculated;
   //--- von 0 bis rates_total zählen
   ArraySetAsSeries(Buffer1, true);
   ArraySetAsSeries(Buffer2, true);
   ArraySetAsSeries(Buffer3, true);
   ArraySetAsSeries(Buffer4, true);
   ArraySetAsSeries(Buffer5, true);
   ArraySetAsSeries(Buffer6, true);
   ArraySetAsSeries(Buffer7, true);
   ArraySetAsSeries(Buffer8, true);
   //--- initiale Null
   if(prev_calculated < 1)
     {
      ArrayInitialize(Buffer1, 0);
      ArrayInitialize(Buffer2, 0);
      ArrayInitialize(Buffer3, 0);
      ArrayInitialize(Buffer4, 0);
      ArrayInitialize(Buffer5, 0);
      ArrayInitialize(Buffer6, 0);
      ArrayInitialize(Buffer7, 0);
      ArrayInitialize(Buffer8, 0);
     }
   else
      limit++;
   
   //--- Hauptschleife
   for(int i = limit-1; i >= 0; i--)
     {
      if (i >= MathMin(1000-1, rates_total-1-50)) continue; // einige alte Raten auslassen, um "Array out of range" oder langsame Berechnung zu verhindern   
      //Indikatorpuffer 1
      if(iMACD(NULL, PERIOD_CURRENT, Fast_EMA, Slow_EMA2, MACD_SMA3, PRICE_CLOSE, MODE_MAIN, i) > 0 //MACD > festen Wert
      )
        {
         Buffer1[i] = Open[i]; //Setze den Indikatorwert beim Kerzenöffnen
         if(i == 0 && Time[0] != time_alert) { myAlert("indicator", "MACD Above Above Zero"); time_alert = Time[0]; } // Sofortige Warnung, nur einmal pro Kerze
        }
      else
        {
         Buffer1[i] = 0;
        }
      //Indikatorpuffer 2
      if(iMACD(NULL, PERIOD_CURRENT, Fast_EMA, Slow_EMA2, MACD_SMA3, PRICE_CLOSE, MODE_MAIN, i) > 0 //MACD > festen Wert
      )
        {
         Buffer2[i] = Close[i]; //Setze den Indikatorwert beim Kerzenschluss
         if(i == 0 && Time[0] != time_alert) { myAlert("indicator", "MACD Above Above Zero"); time_alert = Time[0]; } // Sofortige Warnung, nur einmal pro Kerze
        }
      else
        {
         Buffer2[i] = 0;
        }
      //Indikatorpuffer 3
      if(iMACD(NULL, PERIOD_CURRENT, Fast_EMA, Slow_EMA2, MACD_SMA3, PRICE_CLOSE, MODE_MAIN, i) > 0 //MACD > festen Wert
      )
        {
         Buffer3[i] = High[i]; //Setze den Indikatorwert beim Kerzenhoch
         if(i == 0 && Time[0] != time_alert) { myAlert("indicator", "MACD Above Above Zero"); time_alert = Time[0]; } // Sofortige Warnung, nur einmal pro Kerze
        }
      else
        {
         Buffer3[i] = 0;
        }
      //Indikatorpuffer 4
      if(iMACD(NULL, PERIOD_CURRENT, Fast_EMA, Slow_EMA2, MACD_SMA3, PRICE_CLOSE, MODE_MAIN, i) > 0 //MACD > festen Wert
      )
        {
         Buffer4[i] = Low[i]; //Setze den Indikatorwert beim Kerzentief
         if(i == 0 && Time[0] != time_alert) { myAlert("indicator", "MACD Above Above Zero"); time_alert = Time[0]; } // Sofortige Warnung, nur einmal pro Kerze
        }
      else
        {
         Buffer4[i] = 0;
        }
      //Indikatorpuffer 5
      if(iMACD(NULL, PERIOD_CURRENT, Fast_EMA, Slow_EMA2, MACD_SMA3, PRICE_CLOSE, MODE_MAIN, i) < 0 //MACD < festen Wert
      )
        {
         Buffer5[i] = Open[i]; //Setze den Indikatorwert beim Kerzenöffnen
         if(i == 0 && Time[0] != time_alert) { myAlert("indicator", "MACD Above Below Zero"); time_alert = Time[0]; } // Sofortige Warnung, nur einmal pro Kerze
        }
      else
        {
         Buffer5[i] = 0;
        }
      //Indikatorpuffer 6
      if(iMACD(NULL, PERIOD_CURRENT, Fast_EMA, Slow_EMA2, MACD_SMA3, PRICE_CLOSE, MODE_MAIN, i) < 0 //MACD < festen Wert
      )
        {
         Buffer6[i] = Close[i]; //Setze den Indikatorwert beim Kerzenschluss
         if(i == 0 && Time[0] != time_alert) { myAlert("indicator", "MACD Above Below Zero"); time_alert = Time[0]; } // Sofortige Warnung, nur einmal pro Kerze
        }
      else
        {
         Buffer6[i] = 0;
        }
      //Indikatorpuffer 7
      if(iMACD(NULL, PERIOD_CURRENT, Fast_EMA, Slow_EMA2, MACD_SMA3, PRICE_CLOSE, MODE_MAIN, i) < 0 //MACD < festen Wert
      )
        {
         Buffer7[i] = High[i]; //Setze den Indikatorwert beim Kerzenhoch
         if(i == 0 && Time[0] != time_alert) { myAlert("indicator", "MACD Above Below Zero"); time_alert = Time[0]; } // Sofortige Warnung, nur einmal pro Kerze
        }
      else
        {
         Buffer7[i] = 0;
        }
      //Indikatorpuffer 8
      if(iMACD(NULL, PERIOD_CURRENT, Fast_EMA, Slow_EMA2, MACD_SMA3, PRICE_CLOSE, MODE_MAIN, i) < 0 //MACD < festen Wert
      )
        {
         Buffer8[i] = Low[i]; //Setze den Indikatorwert beim Kerzentief
         if(i == 0 && Time[0] != time_alert) { myAlert("indicator", "MACD Above Below Zero"); time_alert = Time[0]; } // Sofortige Warnung, nur einmal pro Kerze
        }
      else
        {
         Buffer8[i] = 0;
        }
     }
   return(rates_total);
  }
//+------------------------------------------------------------------+

Verwandte Beiträge

Liste
Kommentar (0)